- M.S., Civil Engineering, Michigan State University, 1987
- B.S., Civil Engineering, Michigan State University, 1986
- Professional Engineer, Alabama, #27384
- Professional Engineer, Arkansas, #15712
- Professional Engineer Structural, Florida, #62237
- Professional Engineer, Georgia, #PE041160
- Professional Engineer, Illinois, #062046949
- Professional Engineer Structural, Illinois, #081005355
- Professional Engineer Civil and Structural, Kentucky, #24704
- Professional Engineer Civil, Louisiana, #PE.0032997
- Professional Engineer, Michigan, #6201057899
- Professional Engineer, Missouri, #030003
- Professional Engineer, Mississippi, #17063
- Professional Engineer, Pennsylvania, #PE072210
- Professional Engineer, Tennessee, #118916
- Professional Engineer Structural, Texas, #86820
- OSHA Qualifications
- OSHA 10 Hour
- Overhead Crane Operator Safety Course, Safety Provisions, Inc., 2019
- Crane Signal Person Safety Training, Chicagoland Construction Safety Council, 2018
- OSHA Regulations and Other Standards, ASCE 2016
- Fall Protection Competent Person Class, The Chicagoland Construction Safety Council, 2002
- Supported Scaffold Hazard Awareness Class, The Chicagoland Construction Safety Council, 2002
- Suspended Scaffold Hazard Awareness Class, The Chicagoland Construction Safety Council, 2002
- Crane Related Training Courses
- Current Issues in Crane Safety, ASCE 2016
- How to Review a Lift Plan, ASCE, 2016
- ASCE/OSHA Crane Safety Seminar, ASCE, 2014
- Crane Risk Management, ENR/McGraw Hill, 2011
- Crane Safety for Engineers and Supervisors, ASCE, 2010
- Managing Crane and Rigging Operations to Improve Safety and Eliminate Accidents, University of Wisconsin - Madison, 2002
- Investigations, Failures and Repairs of Existing Structures, SEAOI, 2015
- ACI 318-14: Reorganized for Design Building Code Seminar, ACI, 2015
- School of Masonry - A Hands on Approach, SEAOI, 2014
- Evaluation, Repair, Protection and Strengthening of Existing Concrete Structures, NCSEA/Vector Construction, Inc., 2014
- Seismic Design Manual and Application of the 2010 AISC Seismic Provisions, AISC, 2013
- Occupant Caused Floor Vibrations, SEAOI, 2013
- Significant Changes from ACI 318-08 to ACI 318-11, Structures and Codes Institute, 2013
- Back to the Future: Relearning Passive Fire Resistant Design. PCI, 2013
- Troubleshooting Concrete Forming and Shoring, ACI, 2012
- Design and Construction of Steel Sheet Piling, ASCE Geo-Institute/SEI, 2012
- Ground Modification, Earth Retention, and Deep Foundations, SEAOI, 2011
- Nondestructive Tools and Techniques for SEs, SEAOI, 2011
- Effective Steel Design: Step-by-Step Design for Commercial and Industrial Buildings, AISC, 2010
- Practical Design of Structures for Blast Effects, SEAOI, 2009
- Development and Splicing of Flexural Reinforcement Based on ACI 318-08, PCA, 2009
- Practical Design of Bolted and Welded Steel Connections, ASCE, 2009
- Torsion Design of Structural Concrete Based on ACI 318-05, PCA, 2009
- Design and Renovation of Wood Structures, ASCE, 2008
- ATC 20 Post Earthquake Safety Evaluation of Buildings, 2007
- ATC 45 Safety Evaluation of Buildings After Wind-Storms and Floods, 2007
- Analysis and Design of Post-Tensioned Structures, PTI, 2007
- Wind Loading and Wind Engineering, SEAOI, 2006
- Design Steel Your Way with the 2005 AISC Specification, AISC, 2006
- PCI 6th Edition Design Handbook Seminar, 2006
- Contract Change Order Seminar, Lorman, 2006
- ASCE Structural Vibration Analysis, Design and Troubleshooting, 2005
- Bridge Design Workshop, SEAOI, 2005
- Structural Steel Inspection Seminar, Steel Structures Technology Center, 2003
- ACI/PCA 318-02 Building Code Seminar, 2002
- Fall Protection Competent Person Class, The Chicagoland Construction Safety Council, 2002
- Supported Scaffold Hazard Awareness Class, The Chicagoland Construction Safety Council, 2002
- Suspended Scaffold Hazard Awareness Class, The Chicagoland Construction Safety Council, 2002
- Structural Engineering Winter Institute, NCSEA, 2001
- Wind Loads for Buildings and Other Structures, ASCE, 2000
- Lateral Framing Systems East of the Rockies, AISC, 2000
- Engineered Wood Products in Building Design, The Engineered Wood Association, 1999
- Project Management Workshop, Northwestern University, 1998
- Designing Masonry Using the 1995 MSJC Code, The Masonry Society and the ACI, 1998
- Structural Engineers Refresher Course, SEAOI, 1994
- Steel Erection - Engineering and Execution, AISC, 2020
- Steel Framed Stairway Design, AISC, 2020
- Composite Construction - 101, AISC, 2020
- T.R. Higgins Lecture - Structural Stability, AISC, 2020
- Seismic Design of Buildings, SEAOI, 2020
- Investigation and Repair of Wood Structures, SEAOI, 2020
- Fire & Blast Seminar, SEAOI, 2019
- Determining Component and Cladding Wind Pressures for Roofs, NCSEA, 2019
- Permanent Bracing for Metal Plate Connected Wood Trusses, NCSEA, 2019
- Wind Tunnel Testing for Structural Engineers, NCSEA, 2019
- Overhead Crane Operator Safety Course, Safety Provisions, Inc., 2019
- Crane Signal Person Safety Training, Chicagoland Construction Safety Council, 2018
- Design of Strengthening for Existing Steel Members, AISC, 2018
- Effective Bracing of Flexural Members and Systems, AISC, 2018
- Design of Lateral Load Resisting Systems in Masonry Buildings, ASCE, 2018
- Structural Design for Wind Loads: An Overview of Engineering Considerations for Wood Buildings, Wood Products Council, 2017
- Foundation Design Primer, SEAOI, 2017
- What Structural Engineers Should Know About Fire Design, AISC, 2017
- Load Ratings of Highway Bridges, SEAOI, 2017
- Chi Epsilon Civil Engineering Honor Society
- Tau Beta Pi National Engineering Honor Society
- DeVleig Fellowship, Case Center for Computer Aided Design, Michigan State University
- Structural Engineers Association of Illinois
- Post Tensioning Institute—PTI
- American Concrete Institute—ACI
- American Society of Civil Engineers—ASCE
- American Institute of Steel Construction—AISC
- Precast/Prestressed Concrete Institute—PCI
- Appointments
- Structural Engineering Institute Standards Committee - ASCE/SEI 11 - Structural Condition Assessment of Existing Buildings, Vice Chairman
- Structural Engineering Institute Standards Committee - ASCE/SEI 30 - Guideline for Condition Assessment of the Building Envelope, Vice Chairman
- ASCE Construction Institute Task Committee on Crane Safety on Construction Sites
- ASCE Forensic Engineering Division Committee on Forensic Investigations
Mr. Travis has over 35 years of experience in structural engineering, with expertise in structural analysis and design, construction technology, large-scale collapse investigations, structural dynamics and blast analysis, construction failure analysis, and crane operations and safety practices. A majority of his work focuses on cause and origin investigations of building damage, building envelope performance, repair, and rehabilitation of structures, construction defect analysis, and construction disputes.
Mr. Travis has designed and analyzed a myriad of different structure types, including single family residences, commercial low and medium rise buildings, heavy industrial structures used in the power and manufacturing industries, transmission towers, bridges, and parking structures. He is experienced in the use of wood, reinforced/precast/post-tensioned concrete, structural steel, and masonry in construction.
Mr. Travis has acted as the Project Engineer for a variety of projects including the design and evaluation of post-tensioned, precast and cast-in-place concrete, steel framed, timber, and masonry structures. He has performed structural evaluations, developed plans, specifications, budgets and schedules, and provided construction administration.